The RC4 Series 3 W-DIM4 is a high-power wireless DMX receiver and 4-channel DC dimmer for use with Wireless Solution W-DMX and compatible transmitters. The device operates from 6V to 35VDC, to a maximum total load of 42A. All features of RC4 Harmonized Design are included: high power, high resolution, modes for video and audio applications, HSL color control, built-in effects engine, and more.
Dimensions: 112mm x 62mm x 31mm
Power Input: 6VDC – 35VDC, 0.4W idle draw, ~87% regulation efficiency, screw terminal connections
Dimmer Outputs: 4 low-voltage DC dimmers, Anderson Powerpole connections, 16-bit resolution PWM (16,384 steps)
Output Power, per Dimmer: 40A non-continuous, 15A continuous
Maximum Total Power Handling: 42A (limited by rating of Anderson power input connectors)
Multiple PWM frequencies: 77Hz (high power), 615Hz (flicker free), 5kHz (artifact free for video), 20kHz (noise free for audio)*
Multiple Dimmer Curves: Non-Dim, Non-Dim Inverted, Linear, Linear Inverted, Inverse-Square-Law (ISL), ISL inverted, servo motor pulse clockwise (CW), servo motor pulse counter-clockwise (CCW)*
RC4 Digital Persistence™: 8 user-selectable persistence periods emulating a range of filament lamps*
Series 3 Versatility: wired and wireless DMX dimming, RC4 Flkr Effects Engine™, RC4 HSL Color Controller, RC4 HotPatch™, extensive wired RDM support*.
Sensors: Input voltage, internal temperature, individual dimmer current draw, total current draw (sum of 4 dimmers)*
DMX Input/Output: RC4 3.5mm mini, USITT DMX512/1990 data, non-standard port, connector adaptors available. Wired RDM E1.20 and E1.37 (dimmer configuration) support*
Wireless DMX Protocol: Wireless Solution W-DMX G4
RF Antenna: RP-SMA external, omnidirectional. Alternate antennas can be used for increased sensitivity and directionality.
* All RDM features are available using a wired DMX connection. Wireless RDM is available as an option, requiring installation of an RDM-capable W-DMX card and an RDM-capable W-DMX transmitter.