Wireless

W-DIM4 Four-Channel Wireless Dimmer

The RC4 Series 3 W-DIM4 is a high-power wireless DMX receiver and 4-channel DC dimmer for use with Wireless Solution W-DMX and compatible transmitters.  The device operates from 6V to 35VDC, to a maximum total load of 42A.  All features of RC4 Harmonized Design are included: high power, high resolution, modes for video and audio applications, HSL color control, built-in effects engine, and more.

Dimensions: 112mm x 62mm x 31mm

Power Input: 6VDC – 35VDC, 0.4W idle draw, ~87% regulation efficiency, screw terminal connections

Dimmer Outputs: 4 low-voltage DC dimmers, Anderson Powerpole connections, 16-bit resolution PWM (16,384 steps)

Output Power, per Dimmer: 40A non-continuous, 15A continuous

Maximum Total Power Handling: 42A (limited by rating of Anderson power input connectors)

Multiple PWM frequencies: 77Hz (high power), 615Hz (flicker free), 5kHz (artifact free for video), 20kHz (noise free for audio)*

Multiple Dimmer Curves: Non-Dim, Non-Dim Inverted, Linear, Linear Inverted, Inverse-Square-Law (ISL), ISL inverted, servo motor pulse clockwise (CW), servo motor pulse counter-clockwise (CCW)*

RC4 Digital Persistence™: 8 user-selectable persistence periods emulating a range of filament lamps*

Series 3 Versatility: wired and wireless DMX dimming, RC4 Flkr Effects Engine™, RC4 HSL Color Controller, RC4 HotPatch™, extensive wired RDM support*.

Sensors: Input voltage, internal temperature, individual dimmer current draw, total current draw (sum of 4 dimmers)*

DMX Input/Output: RC4 3.5mm mini, USITT DMX512/1990 data, non-standard port, connector adaptors available. Wired RDM E1.20 and E1.37 (dimmer configuration) support*

Wireless DMX Protocol: Wireless Solution W-DMX G4

RF Antenna: RP-SMA external, omnidirectional.  Alternate antennas can be used for increased sensitivity and directionality.

* All RDM features are available using a wired DMX connection.  Wireless RDM is available as an option, requiring installation of an RDM-capable W-DMX card and an RDM-capable W-DMX transmitter.

£30.00 p/w
W-DMX BlackBox F-1 G4S MK2

The W-DMX BlackBox FLEX-1 G4S Transceiver is perfect as a single universe, highly flexible solution for W-DMX support in our indoor range.

The unit supports both transmit and receive modes of both DMX and RDM signals, and support for both 2.4GHz and 5.8GHz frequency bands, giving access to more channels and hence greater reliability.

With the optional Ethernet protocol support, the product can support any protocol in, be it Art-Net, sACN or ETC Net, and any protocol out, Ethernet or RS-485.

£20.00 p/w
W-DMX BlackBox FLEX-2 G4 Transceiver

The W-DMX BlackBox FLEX-2 G4 Transceiver is the top-of the-line, highly flexible W-DMX BlackBox unit.  

With the capability to both transmit and receive DMX and RDM signals wirelessly, as well as ‘bounce’ them around corners in repeater mode (as an option), flexibility underpins this product.

With Ethernet in/out options, along with Dual-Band and AFHSS support, reliabity and ease of use is greatly increased.

£25.00 p/w
W-DMX Micro R-512 Lite G4 Receiver

The W-DMX Micro R-512 LITE G4 Receiver is the smallest, most portable and flexible W-DMX unit.

Using Adaptive Frequency, Datasafe and Invisi-wire technologies, and leveraging off our G4 radio protocol, the Micro R-512 is reliable and easy to use.

£10.00 p/w
Prolights Wifi DMX Controller

WIFIBOX is a new-generation light control system, conceived to obtain an easy and versatile platform for LED projectors. The signal transmission is managed wired and wireless (through Wi-Fi), both in input and output, even allowing to control the fixtures through a smartphones applications "Smartcolors", available for IOS and Android devices.

App download: Android  iOS

£2.00 p/w
Privacy PolicyLeedsCopyright Light The Way © 2017ManchesterTerms & Conditions