The Jem Glaciator X-Stream creates a total ground fog effect from a self-contained unit. It utilizes the simple but effective Jem heavy fog fluids and a closed loop refrigeration system for an easy-to-produce heavy fog solution.
The Glaciator X-Stream houses a remarkably powerful compressor, allowing colossal fog output levels. And because of its advanced, electronically controlled expansion valve, it has a rapid freeze down time and a fast recovery when fired. This means the Glaciator X-Stream runs continuously, - almost infinitely, with a cool ease. Its chassis design; with two high velocity fans and smart-flow ventilation, also keeps the Glaciator X-Stream ticking in environments of high ambient temperatures. And keeping an eye on internal components is done with an unparalleled simplicity using the Glaciator X-Stream’s Internal Diagnostic Assistance.
Featuring a Power Save System when passive, The Glaciator X-Stream is conscientiously efficient with energy and sound, and its cooling fans have a low noise operation when idle, benefiting theatrical and Studio applications. The Glaciator X-Stream also has the option of an external fluid supply; allowing voluminous levels of heavy fog fluid to be stored up to 100 meters away from the unit and at a depression of up to 6 meters. Where silence is golden and space is rare, the Glaciator X-Stream’s remote ducting system allows you to place the unit up to 10 meters away from its application area. A great solution, the remote access system does not in any way compromise the Glaciator’s X-Stream fog output density!
The DNG-100 converts normal fog from any fog machine (suggested models below) into a floor-hugging cloud of dense, white fog that’ s almost virtually similar to the dry ice effect. This is achieved by cooling the temperature of the fog to the point where it falls to the ground.
The DNG-100 is easy to operate as there are no external controls on the machine. Simply plug the unit IN and place the fog conducting hose from the output of any fog machine to the input of the DNG-100. The unit is fully operational upon being plugged IN. Note that the volume of fog produced is controlled by the fog machine that the DNG-100 is attached to.
Liquid CO 2 is used to cool down the fog of the inbuilt low temperature fog generator. Therefore the machine produce thick low fog which distributes evenly.
The machine is powerful enough to fill even big stages with low fog within a short time. The liquid CO 2 is delivered from a low pressure tank (20 - 24 Bar), which is connected to the machine via a hose. For more information about our low for generator that can be used with high pressure bottles, see CRYO-FOG High Pressure.
The intelligent technology ensures that the fogging process will not start before the cooling chamber has reached the right temperature. As a result, no "warm" fog - which will go upwards - can escape from the machine.
The CRYO-FOG benefits from its compact size, the low weight, the powerful output, the low noise and the easy operation.